Add a ChargePAK rechargeable battery pack and listen to your Pure radio wherever you go. ChargePAKs are much more economical than regular batteries and significantly kinder to the environment, reducing the quantity of batteries that end up in landfill sites
Easy to install – can be fitted in seconds
Easy to use – just fit and forget
Charges inside the radio, no separate charging unit required
Increased battery life per charge over standard rechargeable batteries
Replaces the need for throwaway alkaline batteries
Provides many hours of wireless listening
This guide will show you how to fit your Pure ChargePAK to your Pure radio. Before you start ensure the following is in place:
Ensure your ChargePAK is unpacked and ready to install.
Ensure you have your Pure radio with you and disconnected from the mains power supply.
Installing your ChargePAK – C6L, E1, B1
The ChargePAK plugs in to a socket in the battery compartment of the PURE radio. The battery plug is made up of a number of pins that will correspond to the socket in the radio. The pin numbers vary depending on the type of ChargePAK you are using. The example pictures below show the 4pin C6L ChargePAK connectors.
You'll also notice the battery plug and socket are 'keyed' meaning that the plug can only be plugged in to the socket one way round. In the example picture above, the key appears on the bottom of the socket as two gaps. Likewise the plug will have two protrusions that fit these gaps.
To fit your ChargePAK simply line up the plug with the socket pins, ensure the key side is correct, and push the plug in until it clicks and locks in to place.
Now push the battery in to the battery compartment and close the compartment door.
Fitting ChargePAK A1, D1
The ChargePAK plugs in to the green tab in the battery compartment of the Pure radio.
The ChargePAK simply needs pushing onto this slot
You will know it is fitted as it will click into place and you will not be able to push it in any further. You can now close the compartment door
To fit this ChargePAK you simply need to push it in so that the metal contacts on the ChargePAK are in line with the contacts on the radio.
The ChargePAK fits with the Pure Logo facing upwards
You can now close the compartment door.
Once fitted with the ChargePAK connect to the mains power supply for at least 24 hrs to ensure the ChargePAK gets a full and healthy charge. From that point onwards you will be able to top-up the ChargePAK every time you attach your radio to the mains.